|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
not logged in
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Lesson: Weather Watchers Contributed by: Integrated Teaching and Learning Program, College of Engineering, University of Colorado at Boulder
Learning Objectives (Return to Contents) After this lesson, students should be able to:
Introduction/Motivation (Return to Contents) Ask students to share whether they have ever read, watched or heard a weather report. What kind of information is provided in a weather report? How does this information affect their daily lives?
Ask students if they think the weather has any effect on air pollution. Can they give specific examples? Daily weather conditions definitely affect the quality of the air. Wind can move air pollutants from one location to another. Stagnant air can result in increased concentrations of harmful pollutants. Weather systems typically are defined as being either high- or low-pressure systems. High-pressure systems are air masses with unique properties, such as warm or cool, or moist or dry. Low-pressure systems are pockets of air masses located between high-pressure systems. Since several weather systems (high- and low-pressure systems) occur at the same time over North America, air masses are constantly colliding. When this occurs, weather fronts form, which often leads to some form of precipitation. Precipitation (rain, snow, etc.) washes pollutants from the air and onto the ground. Although this cleanses the air, it may create land and surface water pollution. Engineers, scientists and weathermen use the Air Quality Index (AQI) as a standardized index to classify and measure air pollution. The AQI is used to report air pollution levels to the public. Informing citizens about air pollution levels alerts people who may be susceptible to air pollution (such as young children, senior citizens and anyone with breathing problems). These people may need to modify their behavior and take precautionary measures to protect themselves when air pollution is severe. Once air-monitoring data is collected, the AQI is used to convert the data to a scale that ranges from zero to 100+. The scale intervals indicate the potential health effects of measured daily levels of major air pollutants, including carbon monoxide, nitrogen dioxide, sulfur dioxide, particulate matter and ozone. Why is it important for engineers to be able to predict the weather? (Answer: It helps predict the wind, which affects pollutant transport and concentrations. The amount of water in the air affects how difficult/easy it is to remove pollutants from the air. The water in the air can wash out pollutants from the air.) Lesson Background & Concepts for Teachers (Return to Contents) In this lesson, students are introduced to some concepts of meteorology. It is essential for engineers to have an in-depth understanding of air pressure, temperature and humidity (which all play a role in the weather) in order to control and prevent air pollution. Weather and general atmospheric conditions can affect how a pollutant moves through the air or how it is transferred to the land or water (pollutant transport). For example, wind carries air pollution hundreds of miles away from its source, and precipitation washes air pollution out of the air and transfers it to the soil and bodies of water. Meteorological conditions can also affect the ease with which the pollutant is removed from the air (treatment/prevention options). See the Associated Activities for more detailed background in each area. For more information on weather, see the attached Weather and Air Quality Reading. Vocabulary/Definitions (Return to Contents)
Associated Activities (Return to Contents)
Lesson Closure (Return to Contents) Discuss the barometric pressure and humidity concepts with the students. Write the day's barometric pressure, relative humidity, temperature and dew point on the board. Ask the students to use this information to describe what they expect the weather to be like now and in the near future. Attachments (Return to Contents) Assessment (Return to Contents) Pre-Lesson Assessment Discussion Questions: Ask the students and discuss as a class:
Post-Introduction Assessment Voting: Ask a true/false question and have students vote by holding thumbs up for true and thumbs down for false. Count the votes, and write the totals on the board. Give the right answer. Ask the students:
Lesson Summary Assessment Air Pressure Demo: Submerge a drinking glass in a large container of water, so that the glass is completely filled with water. Lift up the glass, with the mouth facing downward, until the glass is nearly out of the water. Ask the students to explain, in their own words, why the water does not run out of the glass. (Answer: There is no air pressure on the water at the closed end of the glass forcing the water out.) Note: Some self-feeding pet feeders work the same as this demo; if possible, use one of these feeders to make the idea more relevant. Class Discussion: Discuss barometric pressure and humidity concepts with the students. First, write the day's barometric pressure, relative humidity, temperature and dew point on the board. Then, ask the students to use this information to describe what they expect the weather to be like now and in the near future. Diagramming: Ask the students to illustrate the concept of weather through drawing. First, ask the students: Why do engineers care about meteorology? (Answer: Meteorology is important to engineers because [1] It helps predict the weather, which affects pollutant transport and concentrations, [2] The amount of water in the air affects how difficult/easy it is to remove pollutants from the air, and [3] The water in the air can wash out pollutants from the air.) With these thoughts in mind, have them draw pictures of how one or more types of weather (rain, wind, pressure, etc.) may affect air pollution. Homework Internet Search: Assign students one vocabulary term each and have them research it on the Internet. Lead a small discussion of student findings during the next class period. Lesson Extension Activities (Return to Contents) Return to the Air Pollution unit, Lesson 1, air quality activity (What Color Is Your Air Today?). Were there other trends that correlated with the changes in air quality? For example, did the barometric pressure change considerably? What about the wind speed or direction? How about the humidity? What was the temperature? Invite a local meteorologist to speak to the class. References (Return to Contents) Cunningham, J. and Herr, N. Hands-on Physics Activities with Real-Life Applications. West Nyack, NY: The Center for Applied Research in Education, 1994, pp. 188-210. Felder, Richard and Rousseau, Ronald. Elementary Principles of Chemical Processes. New York, NY: John Wiley & Sons, 1986. Fraser, Alistair B. Bad Clouds. Bad Meteorology. Accessed July 13, 2004. http://www.ems.psu.edu/~fraser/Bad/BadClouds.html Laying Some Groundwork-2: Humidity - Suite 101.com. Creative Marketeam Canada Ltd. Accessed July 13, 2004. http://www.suite101.com/article.cfm/13646/82259 Perry, Robert and Green, Don. Perry's Chemical Engineer's Handbook. Sixth Edition. New York, NY: McGraw-Hill Book Company, 1984. UNESCO. 700 Science Experiments for Everyone. New York, NY: Doubleday, 1958. Walpole, Brenda. 175 Science Experiments to Amuse and Amaze Your Friends. Random House Children's Books, 1988. What is a temperature inversion? WeatherQuestions.com, Video Weather & Weather Street. Accessed September 13, 2006. http://www.weatherquestions.com/What_is_a_temperature_inversion.htm Contributors Amy Kolenbrander, Janet Yowell, Natalie Mach, Malinda Schaefer Zarske, Denise CarlsonCopyright © 2004 by Regents of the University of Colorado.The contents of this digital library curriculum were developed under a grant from the Fund for the Improvement of Postsecondary Education (FIPSE), U.S. Department of Education and National Science Foundation GK-12 grant no. 0226322. However, these contents do not necessarily represent the policies of the Department of Education or National Science Foundation, and you should not assume endorsement by the federal government. Supporting Program (Return to Contents) Integrated Teaching and Learning Program, College of Engineering, University of Colorado at BoulderLast Modified: September 26, 2008 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
K12 engineering curriculum
K-12 engineering curricula
K12 engineering curricula
K-12 engineering activities
K12 engineering activities
K-12 engineering lessons
K12 engineering lessons
Engineering for children
Engineering activities for children
K-12 science activities
K12 science activities
K-12 science lessons
K12 science lessons
linker
Are you a bot?
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Use of the TeachEngineering digital library and this website constitutes acceptance of our
Terms of Use and
Privacy Policy.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||