Lesson Generators:
Three Mile Island vs. Hoover Dam

Quick Look

Grade Level: 8 (7-8)

Time Required: 1 hour

Lesson Dependency: None

Subject Areas: Science and Technology

NGSS Performance Expectations:

NGSS Three Dimensional Triangle
MS-ETS1-2

A row of seven gigantic cylindrical devices in a concrete room.
Hydroelectric turbines at the Hoover Power Plant.
copyright
Copyright © U.S. Department of the Interior

Summary

Students are given a history of electricity and its development into the modern age—an energy lifeline upon which our society so depends. A range of methods of electrical power generation are introduced—turbines, hydroelectric, steam, fuel cells, solar power and wind power—along with further discussion of each technology's pros and cons.
This engineering curriculum aligns to Next Generation Science Standards (NGSS).

Engineering Connection

Understanding energy issues is an important part of engineering, as is the ability to clearly explain technological concepts in terms suitable for one's audience.

Learning Objectives

After this lesson, students should be able to:

  • Describe important discoveries leading to electricity.
  • Name different sources of power generation and how they work.
  • List the pros and cons of each method of power generation.

Educational Standards

Each TeachEngineering lesson or activity is correlated to one or more K-12 science, technology, engineering or math (STEM) educational standards.

All 100,000+ K-12 STEM standards covered in TeachEngineering are collected, maintained and packaged by the Achievement Standards Network (ASN), a project of D2L (www.achievementstandards.org).

In the ASN, standards are hierarchically structured: first by source; e.g., by state; within source by type; e.g., science or mathematics; within type by subtype, then by grade, etc.

NGSS Performance Expectation

MS-ETS1-2. Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem. (Grades 6 - 8)

Do you agree with this alignment?

Click to view other curriculum aligned to this Performance Expectation
This lesson focuses on the following Three Dimensional Learning aspects of NGSS:
Science & Engineering Practices Disciplinary Core Ideas Crosscutting Concepts
Evaluate competing design solutions based on jointly developed and agreed-upon design criteria.

Alignment agreement:

There are systematic processes for evaluating solutions with respect to how well they meet the criteria and constraints of a problem.

Alignment agreement:

  • Energy can be used to do work, using many processes. (Grades 6 - 8) More Details

    View aligned curriculum

    Do you agree with this alignment?

  • Power is the rate at which energy is converted from one form to another or transferred from one place to another, or the rate at which work is done. (Grades 6 - 8) More Details

    View aligned curriculum

    Do you agree with this alignment?

  • Examine the ways that technology can have both positive and negative effects at the same time. (Grades 6 - 8) More Details

    View aligned curriculum

    Do you agree with this alignment?

  • Analyze examples of technologies that have changed the way people think, interact, and communicate. (Grades 6 - 8) More Details

    View aligned curriculum

    Do you agree with this alignment?

  • Engage in a research and development process to simulate how inventions and innovations have evolved through systematic tests and refinements. (Grades 6 - 8) More Details

    View aligned curriculum

    Do you agree with this alignment?

  • Analyze how an invention or innovation was influenced by its historical context. (Grades 6 - 8) More Details

    View aligned curriculum

    Do you agree with this alignment?

  • Analyze how the creation and use of technologies consumes renewable and non-renewable resources and creates waste. (Grades 6 - 8) More Details

    View aligned curriculum

    Do you agree with this alignment?

  • Explain the implications of the depletion of renewable and nonrenewable energy resources and the importance of conservation. (Grade 8) More Details

    View aligned curriculum

    Do you agree with this alignment?

  • Explain the environmental implications associated with the various methods of obtaining, managing, and using energy resources. (Grade 8) More Details

    View aligned curriculum

    Do you agree with this alignment?

  • Evaluate human behaviors in terms of how likely they are to ensure the ability to live sustainably on Earth. (Grades 9 - 12) More Details

    View aligned curriculum

    Do you agree with this alignment?

  • Evaluate alternative energy technologies for use in North Carolina. (Grades 9 - 12) More Details

    View aligned curriculum

    Do you agree with this alignment?

Suggest an alignment not listed above

Introduction/Motivation

Get students geared up for this lesson with a 15-minute demonstration to the class of anything electronic, preferably involving sparks, noise and/or moving parts. Many demonstrations and explanations are available at the Society for Amateur Science's webpage at http://www.amasci.com/scied.html. Because different schools have different resources available, a specific activity is not outlined here. Be sure to verify the safety of an experiment from the web before performing it around students. Then present students with the content information in the Lesson Background section.

Have students brainstorm in pairs or small groups to come up with criteria for electric power plants and constraints in their design. Then have them report out and use their ideas to lead a brief discussion (Refer to the Presentation Skills to Win that Bid! Selling Your Power Solution activity for further details). Possible student answers will hopefully include:

  • A power plant should be capable of generating enough electricity for thousands of people (large-scale)
  • Generated electricity should be affordable
  • Energy sources used to supply a power plant should be renewable
  • Energy sources should be from local/national supplies
  • A power plant should not pollute the air, land, or water
  • A power plant should not cause irreparable damage to local ecosystems
  • A power plant should not be an eyesore

Tell students to keep these ideas in mind as you discuss the types of electricity generation outlined below. Ask them if any type meets all or most of these criteria and constraints.

Lesson Background and Concepts for Teachers

Key points in the history of electricity are provided below, serving as a historical background for the teacher.

Early Qualitative Observations

  • As early as 600 BC, it was known that amber could be charged by rubbing it with a cloth.
  • William Gilbert, the father of modern electricity, observed this process on many substances around 1600.
  • In 1660, Otto von Guericke invented a machine that generated static electricity.
  • Robert Boyle recognized that attraction and repulsion were related, which contributed to C.F. Du Fay recognizing two types of charge, later named positive and negative by Benjamin Franklin and Ebenezer Kinnersley.
  • In 1729, Stephen Gray recognized conductors and nonconductors as the two types of materials known to exist.

Quantification

  • Pieter van Musschenbroek invented an early form of capacitor that could store and discharge electricity, leading William Watson to discover current and the modern circuit in 1747.
  • Henry Cavendish began measuring conductivity (how easily electricity flows through a material) and Charles Coulomb came up with mathematical expressions relating force and charge—a fact not always appreciated by introductory physics students.
  • In 1786, Luigi Galvani observed a relationship between muscle tissue and electricity and the exciting field of electrobiology was born.
  • Alessandro Volta invented the battery shortly thereafter. In 1827 and 1841 respectively, G.S. Ohm and J.P. Joule stated their laws, and soon after Kirchoff contributed his as well. These statements that describe natural "laws" led to the quantitative analysis of electric circuits.
  • James Maxwell came up with his famous equations describing electromagnetic fields in 1873 and Heinrich Hertz proved them.
  • Andre Ampere gave mathematical form to Oersted's discovery that currents in a wire create a magnetic field.
  • Michael Faraday and Joseph Henry independently developed the generator.

Key concepts on power generation methods are as follows

Methods of Power Generation

  • Electricity is a naturally occurring phenomena.
  • The majority of power generating systems involve mechanical power being converted into electrical power through the use of turbines, which work like motors, only backwards.
  • These turbines can be driven by any moving fluid; however, most operate as heat engines driven by steam.
  • Steam can be produced in a variety of ways: nuclear, geothermal and fossil fuels.
  • Coal plants produce the vast majority of power in the U.S.

Hydroelectric Power

  • Hydroelectric power plants operate on the flow of water from human-made or naturally occurring bodies of water. Gravity provides the energy source that causes water to move downstream or through dams.
  • Turbines transfer this into a power output when their rotors are turned by the flow.
  • They are highly efficient (~80%) and utilize an abundant renewable resource.
  • They require a body of water and altitude gradient.
  • They pose serious environmental threats because they
  1. Disrupt flooding cycles needed to deposit rich nutrients on surrounding land,
  2. Prevent spawning of many fish species,
  3. Flood large plots of land, destroying valuable habitats and even entire ecosystems.
  4. Are not permanent; reservoirs silt up over time.

Steam & Nuclear Power

  • Geothermal sources of steam exist that can power turbines, but are location specific and require geothermally active sites.
  • Efficiencies of up to 80% can be reached using mechanical power to generate electrical power. Most losses occur due to heat loss from friction in turbines, and also from direct heat transfer out of imperfectly insulated systems.
  • The laws of thermodynamics dictate the maximum efficiency possible for a system.
  • Simply stated, they are as follows:
  1. Matter and energy are always conserved. This means that a finite amount of energy exists in the universe. Energy can neither be created, nor destroyed.
  2. After an energy transformation, a system cannot return to its original energy state because there is always an increase in disorder. In other words, entropy always increases.
  • Efficiency is further limited by heat limits and safety concerns. Most steam plants operate at efficiencies of around 40%, nuclear at 30%.
  • Environmental concerns are very important with such power plants.
  1. Huge problems arise from combustion of fossil fuels because of their harmful byproducts that are released into the environment. Expensive methods exist to reduce the amount of pollution that gets into the air.
  2. Nuclear power leaves us with fission byproducts, which remain highly dangerous for millions of years and must be stored somewhere.
  3. Improper control of fission reactors can lead to meltdown, a disastrous situation that causes the reactor fuel to melt into the earth, releasing massive amounts of pressure, heat and radioactive material that could affect millions. Extensive regulation exists along with numerous safeties to prevent this from ever happening; they arose in part from the two near meltdowns that occurred at Three Mile Island and Chernobyl.
  4. A huge amount of heat must be released into the environment, regardless of how it is generated. This often ends up in streams and lakes, destroying fragile ecosystems.

Fuel Cells

  • Convert chemical power of hydrogen and some other substances directly into electrical power.
  • Require production of hydrogen by some other means.
  • Hydrogen can be stored and distributed much like oil and gasoline as a fuel source, but is more environmentally friendly in the event of a release.
  • The technology is currently very expensive due to requirement of platinum as a catalyst in the process.
  • Are highly efficient, 50-60 % currently, however theoretically this could reach values much closer to 100%.
  • The byproduct of this process is water, and nothing is consumed.

Solar Power

  • Photovoltaic cells directly convert light radiation to electrical power.
  • Solar power is a renewable resource.
  • Real-time energy source that cannot store energy (or else requires storage systems).
  • They are clean, quiet and give off no harmful byproducts.
  • Requires presence of sunlight, thus are not ideal where days are very short for much of the year, though often no other options exist in remote locations.
  • Panels are expensive and have a broad range of efficiencies up to about 30% (typically 10-15%) depending on panel type.

Wind Power

  • Clean and efficient renewable power source.
  • Requires presence of wind; often placed on ridgelines to accomplish this.
  • Must be maintained to reduce noise pollution.
  • Are often perceived as an eyesore.

Associated Activities

Lesson Closure

Although electricity's existence has been known for thousands of years, it has not been until the last two centuries that we have begun to understand its true nature.

Only in the last century have we been able to harness electrical power for general use.

Original coal and oil-fueled steam turbines release harmful hydrocarbons and other substances into the environment, but provide a cheap energy source.

Hydroelectric plants provide a cleaner source of power, but their negative effects have made them unpopular in recent years.

Nuclear power originally promised to provide an inexhaustible source of power, but lost popularity in the late 1970s, when among other things, the very-close-to-home Three Mile Island in Harrisburg, PA, had a near disastrous meltdown due to negligence. Then the 1986 meltdown at Chernobyl increased public fears immensely.

Solar power used in conjunction with fuel cell technologies provide us with hope for the future; however, high initial costs are making this renewable energy source slow to take off.

Vocabulary/Definitions

catalyst: An element that causes a chemical reaction to begin; in a fuel cell, it is usually platinum.

energy: A measurement of ability of a system to do work.

fuel cell: A device that directly transforms hydrogen gas and oxygen into water and electricity.

photovoltaic cell: A device that directly transforms light radiation into electricity.

power: A measure of the amount of energy being used or generated per unit of time (energy/time).

renewable resource: An abundant resource that is not consumed during the process of power generation.

turbine : A device that produces electricity through the action of fast moving liquid, steam or gas.

Assessment

Verbally:

  • Divide the class into teams and play a fact game on electricity and power.
  • The winning team gets a prize; make sure they know about this at the start.
  • Popcorn questions to students while presenting the information to them to make sure they are on their toes.

Written:

  • Have students list two pros and two cons for each type of power plant.

Lesson Extension Activities

Have students investigate and describe areas of cutting-edge power source and power supply research.

Subscribe

Get the inside scoop on all things TeachEngineering such as new site features, curriculum updates, video releases, and more by signing up for our newsletter!
PS: We do not share personal information or emails with anyone.

More Curriculum Like This

High School Lesson
Off the Grid

Students learn and discuss the advantages and disadvantages of renewable and non-renewable energy sources. They also learn about our nation's electric power grid and what it means for a residential home to be "off the grid."

Upper Elementary Lesson
Powering the U.S.

This lesson provides students with an overview of the electric power industry in the United States. Students also become familiar with the environmental impacts associated with a variety of energy sources.

High School Lesson
Nuclear Energy through a Virtual Field Trip

Students learn about nuclear energy generation through a nuclear power plant virtual field trip that includes visiting four websites and watching a short video taken inside a nuclear power plant.

References

Physics Demos & Science Exhibit Designs. Accessed June 22, 2004.http://www.amasci.com/scied.html

History of Electricity, HighBeam Encyclopedia. http://www.encyclopedia.com/html/section/electity_historyofelectricity.asp, 06-22-04

Sources of Electrical Energy, HighBeam Encyclopedia. http://www.encyclopedia.com/html/section/power-el_ SourcesofElectricalEnergy.asp, 06-22-04

What is a simple defintion of the laws of thermodynamics? http://www.physlink.com/Education/AskExperts/ae280.cfm, 06-22-04

Copyright

© 2013 by Regents of the University of Colorado; original © 2004 Duke University

Contributors

Brandon Jones

Supporting Program

Techtronics Program, Pratt School of Engineering, Duke University

Acknowledgements

This content was developed by the MUSIC (Math Understanding through Science Integrated with Curriculum) Program in the Pratt School of Engineering at Duke University under National Science Foundation GK-12 grant no. DGE 0338262. However, these contents do not necessarily represent the policies of the NSF, and you should not assume endorsement by the federal government.

Last modified: June 10, 2019

Free K-12 standards-aligned STEM curriculum for educators everywhere.
Find more at TeachEngineering.org